Concrete Saw Rental
A concrete saw rental lets you make clean, straight cuts through concrete, asphalt, block, brick and stone using a diamond blade. Choose a handheld cut-off saw for shallow, tight or vertical cuts and a walk-behind saw for long, deep cuts in slabs and pavement.
What a Concrete Saw Is Used For
Concrete saws cut hard material where a jackhammer would leave a ragged edge. Typical jobs include cutting control joints in fresh slabs, trenching a garage or basement floor for plumbing or electrical, cutting out a section of driveway or sidewalk for repair, opening doorways or windows in block walls, cutting pavers and curbs, and squaring up concrete before demolition. A clean saw cut keeps the remaining slab intact and gives patches and new pours a neat edge.
Types of Concrete Saws
| Type | Best for | Notes |
|---|---|---|
| Handheld cut-off saw (quickie saw) | Pavers, block, curbs, shallow slab cuts, walls | Gas or electric; versatile but limited depth |
| Walk-behind saw (flat saw) | Long, straight cuts in slabs, driveways and roads | Rolls on wheels for straight lines; deeper cuts |
| Electric concrete saw | Indoor work and enclosed spaces | No engine exhaust; still needs dust control |
| Wall or ring saw | Deep cuts in walls and thick concrete | Specialty tools for openings and thick sections |
| Masonry or tile saw | Brick, block, pavers and stone on a table | Material is fed to a fixed blade, often with water |
Cut depth is set by blade diameter. Larger blades cut deeper, and very thick concrete may need cuts from both sides or a specialty saw. Ask the supplier which blade sizes are available.
How to Choose the Right Saw
- Measure the cut depth and length. A few pavers or a short trench suit a quickie saw rental. A long run across a driveway or slab suits a walk behind concrete saw rental. - Consider where you are cutting. Indoors, choose an electric saw; gas engines produce carbon monoxide and should not be run in enclosed spaces. - Match the blade to the material. Cured concrete, green concrete, asphalt and masonry wear blades differently. Ask for a diamond blade suited to your material, and check whether the blade is included or charged for wear. - Plan for dust and water. Most saws can be fitted with water feed to control dust and cool the blade. Wet cutting is strongly recommended.
Tips Before You Rent
- Call 811 before cutting slabs or pavement over the ground, and scan or check plans for rebar, post-tension cables, conduit and pipes inside the concrete. - Snap a chalk line and cut along it in steady passes rather than forcing full depth at once. - Silica dust from cutting concrete is a serious lung hazard. OSHA's silica standard applies on job sites; use water suppression or vacuum dust collection, and wear an appropriate respirator. - Wear eye and face protection, hearing protection, gloves, long sleeves and steel-toe boots. - Keep both hands on a handheld saw, stand to the side of the blade line, and watch for kickback when the upper front of the blade contacts the material. - Let the blade stop fully before setting the saw down, and never cut with a damaged or cracked blade.
How to Find Concrete Saw Rental Near You
Use the Browse equipment button to search concrete saw rental near me by city and rental dates. You will see live inventory from local and regional rental suppliers on the Derental marketplace, including handheld cut-off saws, walk-behind flat saws, electric concrete saw rental options and masonry saws.
Compare blade size and depth, power type, water kit and blade terms. Rates are set by each supplier and vary by saw type, blade, rental length, location and delivery. When you are ready to rent a concrete saw near you, request it online and confirm blade and pickup details with the supplier.
Concrete Saw Rental FAQs
- Where can I find concrete saw rental near me?
- Use the Browse equipment button on this page to search live inventory from local and regional suppliers by city and rental dates, then compare them side by side.
- How much does concrete saw rental cost?
- Rates are set by each supplier and depend on the machine size, rental length (day, week or month), your location and delivery. Compare a few suppliers' quotes for your dates to see current pricing.
- Do I need a license or training for concrete saw rental?
- Most compact equipment needs no special license, but you're responsible for operating it safely and following the manufacturer's instructions. Larger machines, aerial lifts and forklifts require operator training under OSHA rules on jobsites. Ask the supplier about walkthroughs.
- Can the equipment be delivered?
- Many suppliers deliver and pick up, especially for larger machines. Delivery fees and availability vary by supplier, so check them when you compare quotes.